Home Guestbook
Section Top Introduction 3D Parts List Assembly Holder Labels Fixing Holders In Place Download/Purchase
NESPRESSO COFFEE POD HOLDER
A 3D printed cabinet door/under shelf holder for all Nespresso original coffee pod capsules including Phillips L'OR XXL pods.
Under shelf version
About The Coffee POD Holders
Designed to be printed on a 200x200mm bed printer this is a collection of Nespresso original coffee pod holder that are designed to be fixed to the inside of a kitchen cabinet door, under a shelf or under a cabinet.
There are three holder sizes quad, double and single column in both Nespresso original and also Phillips L'OR XXL pod sizes.
POD holders for Nespresso Original & L'OR XXL included
As many manufacturers don't label their pods all holders can be fitted with paper label holders if required.
Holders are simply fixed to cabinet doors with thin double sided tape or can be fixed with screws.
There is also an option to mount under a shelf or under a cabinet in which case the screwed version must be used.
Spare labels are stored in a 3D printed label holder that can be fixed in a convenient location.
Door Holder Example including spare label holder
Under Shelf Mount Example
3D Printed Parts
All parts are supplied in three sizes, single column, double column and quad column.
The holders will hold 5 Original Nespresso pods in each column and each L'OR XXL columns will hold 4 pods in each.
Use combinations of sizes to fit your cabinet door space.
Original Nespresso Pod Holders Glue On | ||
File Name | ||
NespressoPod1x6mm | NespressoPod2x6mm | NespressoPodHolder6mmx4 |
Original Nespresso Pod Holders Screw On | ||
File Name | ||
NespressoPod1x6mmScrew | NespressoPod2x6mmScrew | NespressoPodHolder6mmx4_Screw |
Original Nespresso Pod Label Holder Rear | ||
File Name | ||
NespressoLabel1_1x6mm | NespressoLabel1_2x6mm | NespressoLabel1_6mm |
|
|
|
4 off M2x6mm self tappers | 4 off M2x6mm self tappers | 6 off M2x6mm self tappers |
Single column holders use the same label holders for single and XXL pods.
Original Nespresso Pod Label Holder Front | ||
File Name | ||
NespressoLabel2x1 | NespressoLabel2x2 | NespressoLabel2 |
Single column holders use the same label holders for single and XXL pods.
Original Nespresso Pod Label Holder Under shelf Rear | ||
File Name | ||
NespressoLabel1_Underx1 | NespressoLabel1_Underx2 | NespressoLabel1_Underx4 |
4 off M2x4mm self tappers 2 off M2x6mm self tappers |
4 off M2x4mm self tappers 2 off M2x6mm self tappers |
6 off M2x4mm self tappers 3 off M2x6mm self tappers |
Single column holders use the same label holders for single and XXL pods.
As well as using Nespresso Original pods the Phillips L'OR machine also uses XXL pods.
I have included designs for these larger pods as well.
Phillips L'OR XXL Nespresso Pod
Holders Glue On |
||
File Name | ||
NespressoPodHolder1x6mm2Shot | NespressoPodHolder2x6mm2Shot | NespressoPodHolder6mm2Shotx4 |
Phillips L'OR XXL Nespresso Pod Holders Screw On | ||
File Name | ||
NespressoPodHolder1x6mm2ShotScrew | NespressoPodHolder2x6mm2ShotScrew | NespressoPodHolder6mm2Shotx4Screw |
Phillips L'OR XXL Nespresso Pod Label Holder Rear | ||
File Name | ||
NespressoLabel1_1x6mm | NespressoLabel1_2shot_2x6mm | NespressoLabel1_2shot_6mm |
4 off M2x6mm self tappers | 4 off M2x6mm self tappers | 6 off M2x6mm self tappers |
Single column holders use the same label holders for single and XXL pods.
Phillips L'OR XXL Nespresso Pod Label Holder Front | ||
File Name | ||
NespressoLabel2x1 | NespressoLabel2shot_2x2 | NespressoLabel2_2shot |
Single column holders use the same label holders for single and XXL pods.
Phillips L'OR XXL Nespresso Pod Label Holder Under shelf Rear | ||
File Name | ||
NespressoLabel1_Underx1 | NespressoLabel1_Underx2_2shot | NespressoLabel1_Underx4_2shot |
4 off M2x4mm self tappers 2 off M2x6mm self tappers |
4 off M2x4mm self tappers 2 off M2x6mm self tappers |
6 off M2x4mm self tappers 3 off M2x6mm self tappers |
Single column holders use the same label holders for single and XXL pods.
Cabinet Door Holder Build order and fixing
M2x6mm self tappers hold part
C to B using top holes & part C & B to A using bottom holes.
Under Shelf Holder Build Order and fixing
M2x6mm self tappers hold part A & B together and are pushed through the M2.5 holes in part B and screwed into the M1.5 holes in part A.
The M2x4mm self tappers hold part C to part B.
Assembled under shelf holder
Spare Label Holder Rear | Spare Label Holder Front |
File Name: SpareLabel1 | File Name: SpareLabel2 |
6 off M2 x 20mm self tappers & 6 off M2 washers |
Assembled Spare label holder with 6 off M2x20mm self tappers and washers holding the 2 parts together.
Labels
Labels simply slot into the label holder above or in front of each row of PODs and help identify the many PODs that come with no labelling by the manufacturer.
Labels can be plain text and typed into a word template or images made up in a paint package then inserted into a word template.
The completed block of labels is then printed out on photo paper and individual labels are then cut out with a craft knife.
Spare labels are stored in a label holder.
Below a single label cut from a printed template.
Below the labels are made in bulk by inserting them into a Word template.
The template is a simple page containing 40 text boxes that you can fill with basic text or a custom image.
The individual multilayer labels below are included in the download for editing in a paint package.
The labels are then printed on photo paper and simply cut out with a craft knife ready for use.
The label holder is made up of 2 parts and is glued to the cabinet door with double sided tape.
Designing the labels
I have included a blank picture template as well as example labels so you can make your own images.
I just add a background to match the pod colour then type in a description of the pod with it's intensity value.
I copy the pod makers logo from Google and paste it in place.
Once you have a collection of images made up they are simply inserted into the word template.
Below in the Word template right click the picture you want to change select "Fill" then "Picture" select your picture made previously and the picture is filled into the text box.
Fixing POD Holders In Place
Holders are simply glued or screwed in place depending on location/cabinet door style.
Gluing
My cabinets have Shaker style doors and the center sections is too thin for screw fixings.
I used thin clear double sided tape in strips top and bottom, trimming with a craft knife around the cutouts.
Once mounted on the cabinet door I applied a thin bead of hot melt glue on the top edge of the label holder.
Screw Mounting
The under shelf/under cabinet holders are always screwed in place but if you print the screw version of the cabinet door holders they can also be screwed in place.
Use M3 mushroom headed screws to fix the holder in place.
When screwing the under shelf holders to cabinet shelves mount the holder just forward of the shelf so the labels can still be removed.
Mount the holder with the label slots forward of the shelf edge to allow the labels to be slid upwards for changing.
Note on some kitchens especially wall cabinets the shelves are very close to the cabinet doors so when mounting leave a gap where the shelf is to prevent the shelf hitting the coffee pods mounted on the door.
Below shelf space between coffee pod holders
Downloads